Gilles Tooling_改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

YZF-R7(22-24)Gilles Tooling handshield clutch side

Product Code：KHP2-01-BD

Description 簡介：DESCRIPTION The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HK$1270

YZF-R7(22-24)Gilles Tooling IP crashpad-kit black

Product Code：IP-YA36-B

Description 簡介：DESCRIPTION Specification: patent, innovative crash pad perfect in form gilles.tooling design crash cap made of special material for best sliding characteristics progressive impact inlay bike specific, flexible frame mounting parts normally no need to cut the fairings Function: progressive impact inlay can prevent major damage reduced risk of frame and engine damages crash cap has high abrasion resistance easy mounting for wide range of models directly with specific mounting kit al

Price：HK$1580

YZF-R7(22-24)Gilles Tooling GTA rear crashpad black

Product Code：GTA-R-Y02.b

Description 簡介：DESCRIPTION impact body made of special plastic for perfect slipping characteristics (resistant against hits and abrasion) with center part made of aluminum, unique distinctive GILLES.TOOLING design (matching our other parts), long guiding inside to increase stability, reduction of impact damage around rear swing arm and axle. Scope of delivery: set of both sides for rear axle.

Price：HK$770

YZF-R7(22-24)Gilles Tooling handlebar GP-LIGHT 2 500 RACE

Product Code：GPL2-500-RACE

Description 簡介：DESCRIPTION Black anodized diameter 50mm (1-31/32 inch) Very lightweight construction Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Fixed angle of 6 degree is the perfect compromise for sportive and street use Specific Information: Honda CBR 1000RR/R Fireblade (Type SC82) the additional mounting kit GPL2-ABK-H01 is needed. Yamah

Price：HK$2310

YZF-R7(22-24)Gilles Tooling handlebar GP-LIGHT 2 500 black

Product Code：GPL2-500.b

Description 簡介：DESCRIPTION Features: black anodized Very lightweight construction (ca. 670 gram) Engraved markings for easy justification to the fork Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Length of the tube is 255,5mm Fixed angle of 6 degree is the perfect compromise for sportive and street use Note: for all GSX-R 600, 7

Price：HK$1980

Z900RS(17-24)Gilles Tooling engine holder

Product Code：EH-01.bs

Description 簡介：DESCRIPTION Two color anodizing in black/silver . Set of two pieces (for left and right side. Original screws will be used for mounting). Holder is made of high grade aluminum and is milled from the whole block. Replaces the original holder.

Price：HK$2200

Z900RS(17-24)Gilles Tooling exhaust holder kit

Product Code：UAH-22-KIT.pb

Description 簡介：DESCRIPTION Replaces the original exhaust bracket Passenger pegs fall off (including pillion seat cover for the left side) Powder coated holder Two-piece with milled emblem Fits the retro look of the motorcycle

Price：HK$1200

Z900RS(17-24)Gilles Tooling shiftholder

Product Code：SHIHO-ZR900H-KIT-T

Description 簡介：DESCRIPTION The gear shaft stands too far out of the gear box, it bends elastically when shifting hard or quick which is the reason for imprecise gear shifting Our Shiftholder helps to eliminate gear shift problems, it stabilizes the gear shaft and eliminates vague shifting. A needle bearing is used, it comes in hard anodized titanium color.

Price：HK$950

YZF-R7(22-)Gilles Tooling GYT-R7RWC-S0 rear wheel attachment

Product Code：RWK-02-B

Description 簡介：DESCRIPTION During changing the wheel the rear brake caliper and the wheel bushing stay in place and a guide rail at the inside allows easy moving of the wheel. Also included is a set of axle protectors. Form and function directly inspired by racing teams: impact body made of aluminum, unique distinctive design (matching our other parts), reduction of impact damage around rear swing arm and axle. The conical shaped milled aluminum body helps pulling the axle. Ideal use in combination with

Price：HK$4400

YZF-R7(22-24)Gilles Tooling rear sprocket guard

Product Code：TG-05-KIT-BD

Description 簡介：DESCRIPTION This cover will be mounted under the swing arm and is homologated for race track use. Can not be used in combination with our PSA2 spools.

Price：HK$540

YZF-R7(22-24)Gilles Tooling passenger footpeg cover

Product Code：PPC-11-KIT-B

Description 簡介：DESCRIPTION This kit contains the following components: 2x cover for holders of the passenger pegs. Thus, after disassembling the original passenger pegs, the corresponding open mounting points can be concealed cleanly and visually attractive. The original screws will be used for mounting. IN ADDITION, the covers for the pillion seat holders also work as an attachment for lashing straps. Thus, the motorcycle can be properly and securely attached during transport.

Price：HK$770

YZF-R7(22-24)Gilles Tooling race cover kit

Product Code：RCK-14-B

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. Alos this racing covers for the mounting points mirrors and license plate bracket. The utility is always an important detail: racing covers protect open mounting points against dirt and moisture.

Price：HK$1650

YZF-R7(22-24)Gilles Tooling shiftholder

Product Code：SHIHO-RM39-KIT-T

Description 簡介：DESCRIPTION The gear shaft stands too far out of the gear box, it bends elastically when shifting hard or quick which is the reason for imprecise gear shifting Our Shiftholder helps to eliminate gear shift problems, it stabilizes the gear shaft and eliminates vague shifting. A needle bearing is used, it comes in hard anodized titanium color. The original screws will be used for mounting. A sprocket cover is inside the scope of delivery too.

Price：HK$940

GSX-8S(23-24)Gilles Tooling GT handlebar Black

Product Code：GTO-L-B

Description 簡介：DESCRIPTION Our conical handlebar (clamp diameter 28,6 mm, 755 mm wide, 86 mm high, 94 mm rearward bent in a 24 degree angle, 140 mm clamping width, tube diameter 14,2mm) scores with high rigidity and great look thanks to the high quality anodized surface. Note Kawasaki Z900 RS / Café: fits only the RS model.

Price：HK$880

GSX-8S(23-24)Gilles Tooling GT handlebar Gold

Product Code：GTO-L-G

Description 簡介：DESCRIPTION GT oversize handlebar low gold Our conical handlebar (claml diameter 28,6 mm, 755 mm wide, 86 mm high, 94 mm rearward bent in a 24 degree angle, 140 mm clamping width, tube diameter 14,2mm) scores with high rigidity and great look thanks to the high quality anodized surface.

Price：HK$880

CB750 Hornet(22-23)Gilles Tooling fuel cap

Product Code：FCAP-02-B

Description 簡介：DESCRIPTION The new GILLES fuel filler cap is an outstanding example of precise craftsmanship. The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company. Developed through experiences fro

Price：HK$1160