ergonomics_Gilles Tooling_改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

XSR900(15021)Gilles Tooling adjustable handlebar clamp black

Product Code：2DGT-01.b

Description 簡介：DESCRIPTION Revolutionary 2DGT handlebar risers help you to find your perfect handlebar position. Move them up and down, forward and backward. 2DGT handlebar risers give you still unseen adjustability and styling. Details: suited for top yokes with 10.5mm holes for 28.6mm handlebars spacers for 22mm handlebars available forward and backward adjustable in 3.6mm steps max. range forward and backward 25mm (depends on height adjustment and bike tank) up and down adjustable in 5

Price：HK$1980

XSR900(15-21)Gilles Tooling AXB chain adjuster red

Product Code：AXB-RN29.r

Description 簡介：DESCRIPTION The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HK$1100

XSR900(15-21)Gilles Tooling AXB chain adjuster black

Product Code：AXB-RN29.b

Description 簡介：DESCRIPTION The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HK$1100

YZF-R3(15-18)Puig footpegs Racing

Product Code：6301* + adapter

Description 簡介：RACING FOOTPEGS FOR MOTORCYCLE YAMAHA YZF-R3 2017 The Puig racing footpegs are specially designed for R motorcycles and offer maximum grip to the rider and passenger. Its attractive sport design makes it the perfect complement for the most radical motorcycles, whose aesthetics receive an even more extreme touch. They measure 72 mm long and 27 mm wide and their weight is only 90 gr. Ergonomics is a key factor in its design, which has been designed to increase its free height to the ground, allo

Price：HK$360+adapte

MT-10(16-21)Gilles Tooling 2DGT adjustable handlebar risers

Product Code：2DGT-02-15.b

Description 簡介：DESCRIPTION Revolutionary 2DGT handlebar risers help you to find your perfect handlebar position. Move them up and down, forward and backward. 2DGT handlebar risers give you still unseen adjustability and styling. Details: suited for top yokes with 10.5mm holes for 28.6mm handlebars forward and backward adjustable in 3.6mm steps max. range forward and backward 25mm (depends on height adjustment and bike tank) up and down adjustable in 5mm steps with spacers (for MT10 10 mm lower, 5 mm lower or

Price：HK$1980

MT-10(22-24)Puig footpegs Enduro 2.0

Product Code：20851* + adapter

Description 簡介：ENDURO 2.0. FOOTPEGS FOR MOTORCYCLE YAMAHA MT-10 2024 Machined from a block of aluminum and anodized in up to seven different colors. Its design offers a robust and at the same time athletic image, without concessions to superfluous elements. At a functional level, the distance from the rotation axis to the beginning of the rubber base has been reduced to prevent the footpeg from being off-center with respect to the brake and gear levers. They can be used with the rubber base or withou

Price：HK$1090+adapt

MT-10(22-24)Gilles Tooling rearset MUE2

Product Code：MUE2-Y03-B

Description 簡介： DESCRIPTION A completely new generation of rearsets: the MUE2 combines futuristic design with the highest quality and simplified adjustability of the footrest. Either black or gold anodized with contrast adjusters it is also an optical highlight on every bike.The position of the footrests as well as the brake and gear levers can be adjusted according to personal needs. The positioning of the footrests is done by a combination of a push and rotatable setting at only one point, so this is really

Price：HK$7090

MT-10(22-24)Gilles Tooling brake lever type FXL

Product Code：FXBL-39-B

Description 簡介：DESCRIPTION optimal shape for all grip styles unique by proprietary GILLES design ideal lever length for perfect control phosphate precise bearing TÜV approved up to 35 times adjustable high accurate grip length adjusting comfortable adjusting by central hand wheel rated brake joint beyond two finger braking zone INFO: the central hand wheel comes in three colors (black, red and silver) along with the lever

Price：HK$1430

MT-10(22-24)Gilles Tooling clutch lever type FXL

Product Code：FXCL-47-B

Description 簡介：DESCRIPTION Product details: optimal shape for all grip styles unique by proprietary GILLES design ideal lever length for perfect control phosphate precise bearing TÜV approved up to 35 times adjustable high accurate grip length adjusting comfortable adjusting by central hand wheel rated brake joint beyond two finger braking zone INFO: the central hand wheel comes in three colors (black, red and silver) along with the lever

Price：HK$1430

MT-10(22-24)Gilles Tooling 2DGT adjustable handlebar risers

Product Code：2DGT-11-15-B

Description 簡介：DESCRIPTION 2DGT verstellbare Lenkerböcke mit ABK-15

Price：HK$1880

YZF-R1(15-19) Gilles Tooling handlebar GP-LIGHT 2

Product Code：GPL2-500-RACE

Description 簡介：DESCRIPTION Black anodized diameter 50mm (1-31/32 inch) Very lightweight construction Separated bolting for clamp and tube to avoid damages to the fork in case of crash Bolting of the tube is at the outer position for easier change with standard tools Fixed angle of 6 degree is the perfect compromise for sportive and street use Specific Information: Honda CBR 1000RR/R Fireblade (Type SC82) the additional mounting kit GPL2-ABK-H01 is needed. Yamah

Price：HK$2300

YZF-R1(15-19)Gilles Tooling fuel cap

Product Code：FCAP-03-B

Description 簡介：DESCRIPTION The new GILLES fuel filler cap is an outstanding example of precise craftsmanship. The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company. Developed through experiences fro

Price：HK$1170

YZF-R1(15-19)Gilles Tooling race cover kit

Product Code：RCK-07

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. Also this racing covers for the mounting points of pillion foot pegs and licence plate holder. The utility is always an important detail: racing covers protect open mounting points against dirt and moisture.

Price：HK$1430

YZF-R1(15-19)Gilles Tooling safety axle nut ACM titan

Product Code：ACM-24-15

Description 簡介：DESCRIPTION made of titanium ti6alv4; a 20 gram (less than one ounce) lightweight axle nut in a shapely design, innovative pin-lock secure high locking characteristics; multifunctional application: safety for different bolted joints such as rear axles, pivot shafts, yokes etc.; no TÜV certificate required, plastic-pin of the pin-lock accommodate thread form and locks with friction, simple assembly with a regular hexagon nut.

Price：HK$890

YZF-R1(15-19)Gilles Tooling top yoke nutACMA aluminum

Product Code：ACMA-28-10.b

Description 簡介：DESCRIPTION Looking at your motorcycle you will find the GILLES.TOOLING ACMA to be the icing on the cake. Anodized in four different colors, it crests your steering central and catches every eye. GILLES.TOOLING ACMA is derived straight from our popular patented self-locking titanium ACM safety lock. In common with its ancestor, it has the easy to use pin-interlock system to prevent it from loosening. ACMA Is designed solely for use as top yoke nut. Do not use it on the rear axle or swing arm

Price：HK$480

YZF-R1(15-19)Gilles Tooling top yoke

Product Code：FO-RN49-0-03-SET-B

Description 簡介：DESCRIPTION Our milled motorcycle triple clamps combine the immense know-how from the motorcycle racing elite with top-notch quality and offer an impressive list of outstanding features. Each component is made from high-quality aluminum to ensure maximum performance and stability. One outstanding feature of our triple clamps is their minimal weight. By using high-quality aluminum, a lightweight construction is made possible, reducing the overall weight of the motorcycle. This results in sign

Price：HK$3720