Safety_Gilles Tooling_改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

YZF-R6(17-20)Gilles Tooling mounting kit reverse shifting

Product Code：RK-RJ27.b

Description 簡介：DESCRIPTION This mounting kit reverse shifting (only for use with the rearset FXR-Y07) allows to use GP/reversed shifting for this rearset.

Price：HKD620

YZF-R6(17-20)Gilles Tooling AXB chain adjuster

Product Code：AXB-RJ27.b

Description 簡介：DESCRIPTION The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HKD1160

YZF-R6(17-20)Gilles Tooling fuel cap

Product Code：FCAP-03-B

Description 簡介：DESCRIPTION Our motor protectors are the perfect combination of design and protection. Therefore a very precise adaptation to the housing cover of every motorcycle happens. This is achieved by a mounting plate made of anodized aluminum combined with the slider on top made of extremely durable POM. Due to the included screws, the installation is very simple.

Price：HKD1230

YZF-R6(17-20)Gilles Tooling Race Cover Kit black

Product Code：RCK-04.b

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. Alos this racing covers for the mounting points of pillion foot pegs, mirrors or license plate bracket. The utility is always an important detail: racing covers protect open mounting points against dirt and moisture. This kit contains the following components for the YZF-R6 (year 2017, type RJ27): 2x mirror cover, 2x cover for holders of the passenger pegs and 1x cover for the license plate holder. Thus, after disas

Price：HKD1270

YZF-R6(17-20)Gilles Tooling axle nut ACM titan M24X1,5

Product Code：ACM-24-15

Description 簡介：DESCRIPTION made of titanium ti6alv4; a 20 gram (less than one ounce) lightweight axle nut in a shapely design, innovative pin-lock secure high locking characteristics; multifunctional application: safety for different bolted joints such as rear axles, pivot shafts, yokes etc.; no TÜV certificate required, plastic-pin of the pin-lock accommodate thread form and locks with friction, simple assembly with a regular hexagon nut.

Price：HKD930

YZF-R6(17-20)Gilles Tooling top yoke nutACMA aluminum

Product Code：ACMA-28-10.b

Description 簡介：DESCRIPTION Looking at your motorcycle you will find the GILLES.TOOLING ACMA to be the icing on the cake. Anodized in four different colors, it crests your steering central and catches every eye. GILLES.TOOLING ACMA is derived straight from our popular patented self-locking titanium ACM safety lock. In common with its ancestor, it has the easy to use pin-interlock system to prevent it from loosening. ACMA Is designed solely for use as top yoke nut. Do not use it on the rear axle or swing arm

Price：HKD500

YZF-R7(17-20)Gilles Tooling top yoke nutACMA aluminum

Product Code：ACMA-28-10.bl

Description 簡介：DESCRIPTION Looking at your motorcycle you will find the GILLES.TOOLING ACMA to be the icing on the cake. Anodized in four different colors, it crests your steering central and catches every eye. GILLES.TOOLING ACMA is derived straight from our popular patented self-locking titanium ACM safety lock. In common with its ancestor, it has the easy to use pin-interlock system to prevent it from loosening. ACMA Is designed solely for use as top yoke nut. Do not use it on the rear axle or swing arm

Price：HKD500

YZF-R7(22-25)Gilles Tooling fuel cap

Product Code：FCAP-03-B + FCAP-TOOL-01-B

Description 簡介：DESCRIPTION The new GILLES fuel filler cap is an outstanding example of precise craftsmanship. The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company. Developed through experiences fro

Price：HKD1230+610

YZF-R7(22-25)Gilles Tooling MOON barend-mirror round

Product Code：M04-01-BD

Description 簡介：Description KEY FACTS - SCOPE OF DELIVERY: 1 PIECE, MIRROR CAN BE USED LEFT AND RIGHT - ELEGANT BAR END MIRROR - UNIVERSAL CLAMPING - PLUG-AND-PLAY - STEPLESS DUAL ADJUSTMENT - MATERIAL = HIGH-STRENGTH ALUMINUM - WEIGHT = 190g - WIDTH = 6mm - OPTIONAL: 7 DIFFERENT COLORINGS AVAILABLE(SEE BELOW) - HOMOLOGATION = E-MARK - SPARE PARTS SUPPLY = WE OFFER SPARE PARTS SUPPLY FOR THIS PRODUCT BAR END MIRROR This variant allows for easy and space-saving installation directly at the ba

Price：HKD1670/each

YZF-R7(22-25)Gilles Tooling STRATOS barend-mirror

Product Code：M03-01-BD

Description 簡介：Description KEY FACTS - SCOPE OF DELIVERY: 1 PIECE, MIRROR CAN BE USED LEFT AND RIGHT - ELEGANT BAR END MIRROR - UNIVERSAL CLAMPING - PLUG-AND-PLAY - STEPLESS DUAL ADJUSTMENT - MATERIAL = HIGH-STRENGTH ALUMINUM - WEIGHT = 190g - WIDTH = 6mm - OPTIONAL: 7 DIFFERENT COLORINGS AVAILABLE(SEE BELOW) - HOMOLOGATION = E-MARK - SPARE PARTS SUPPLY = WE OFFER SPARE PARTS SUPPLY FOR THIS PRODUCT BAR END MIRROR This variant allows for easy and space-saving installation directly at the bar

Price：HKD1670/each

YZF-R1(20-25)Gilles Tooling clutch lever type FXL

Product Code：FXCL-31.b

Description 簡介：DESCRIPTION Product details: optimal shape for all grip styles unique by proprietary GILLES design ideal lever length for perfect control phosphate precise bearing TÜV approved up to 35 times adjustable high accurate grip length adjusting comfortable adjusting by central hand wheel rated brake joint beyond two finger braking zone

Price：HKD1150

YZF-R1(20-25)Gilles Tooling fuel cap

Product Code：FCAP-03-B

Description 簡介：DESCRIPTION The new GILLES fuel filler cap is an outstanding example of precise craftsmanship. The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company. Developed through experiences fro

Price：HKD1230

YZF-R1(20-25)Gilles Tooling rear sprocket guard

Product Code：TG-02-KIT.gib

Description 簡介：DESCRIPTION This cover will be mounted under the swing arm and is homologated for race track use.

Price：HKD570

YZF-R1(20-25)Gilles Tooling sprocket cover

Product Code：SC-03.b

Description 簡介：DESCRIPTION Our style parts combine great appearance and style with utility. This is seen in all products of this group, also for this beautiful sprocket cover. The unique design matches with look of others from our parts and for the look of the bike as well.

Price：HKD1730

YZF-R1(20-25)Gilles Tooling safety axle nut ACM titan

Product Code：ACM-24-15

Description 簡介：DESCRIPTION made of titanium ti6alv4; a 20 gram (less than one ounce) lightweight axle nut in a shapely design, innovative pin-lock secure high locking characteristics; multifunctional application: safety for different bolted joints such as rear axles, pivot shafts, yokes etc.; no TÜV certificate required, plastic-pin of the pin-lock accommodate thread form and locks with friction, simple assembly with a regular hexagon nut.

Price：HKD930

YZF-R1(20-25)Gilles Tooling top yoke nutACMA aluminum Black

Product Code：ACMA-28-10.b

Description 簡介：DESCRIPTION Looking at your motorcycle you will find the GILLES.TOOLING ACMA to be the icing on the cake. Anodized in four different colors, it crests your steering central and catches every eye. GILLES.TOOLING ACMA is derived straight from our popular patented self-locking titanium ACM safety lock. In common with its ancestor, it has the easy to use pin-interlock system to prevent it from loosening. ACMA Is designed solely for use as top yoke nut. Do not use it on the rear axle or swing arm

Price：HKD500