Gilles Tooling_改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

YZF-R7(22-25)Gilles Tooling handshield clutch side

Product Code：KHP2-01-BD

Description 簡介：DESCRIPTION The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HKD1340

YZF-R7(22-25)Gilles Tooling IP crashpad-kit black

Product Code：IP-YA36-B

Description 簡介：DESCRIPTION Specification: patent, innovative crash pad perfect in form gilles.tooling design crash cap made of special material for best sliding characteristics progressive impact inlay bike specific, flexible frame mounting parts normally no need to cut the fairings Function: progressive impact inlay can prevent major damage reduced risk of frame and engine damages crash cap has high abrasion resistance easy mounting for wide range of models directly with specific mounting kit al

Price：HKD1660

YZF-R7(22-25)Gilles Tooling GTA rear crashpad black

Product Code：GTA-R-Y02.b

Description 簡介：DESCRIPTION impact body made of special plastic for perfect slipping characteristics (resistant against hits and abrasion) with center part made of aluminum, unique distinctive GILLES.TOOLING design (matching our other parts), long guiding inside to increase stability, reduction of impact damage around rear swing arm and axle. Scope of delivery: set of both sides for rear axle.

Price：HKD800

Ninja 500/SE(24-25)Gilles Tooling rearset FXR

Product Code：FXR-K06-B

Description 簡介：Description Features: maximum performance and minimum weight reduced to maximum performance know how from world superbike and the many World Champion titles achieved pure sportiness in aesthetic design perfect balance of lightweight construction and stress resistance unique by proprietary gilles.tooling design double ball bearing shift- and brake lever normal and reversed shifting possible3 time adjustable fix racing footrest Note: this rearsets requires for the necessary TÜV registration, in o

Price：HKD4250

Ninja 500/SE(24-25)Gilles Tooling STRATOS barend-mirror

Product Code：M03-02-BD

Description 簡介：Description KEY FACTS - SCOPE OF DELIVERY: 1 PIECE, MIRROR CAN BE USED LEFT AND RIGHT - ELEGANT BAR END MIRROR - UNIVERSAL CLAMPING - PLUG-AND-PLAY - STEPLESS DUAL ADJUSTMENT - MATERIAL = HIGH-STRENGTH ALUMINUM - WEIGHT = 190g - WIDTH = 6mm - OPTIONAL: 7 DIFFERENT COLORINGS AVAILABLE(SEE BELOW) - HOMOLOGATION = E-MARK - SPARE PARTS SUPPLY = WE OFFER SPARE PARTS SUPPLY FOR THIS PRODUCT BAR END MIRROR This variant allows for easy and space-saving installation directly at the bar

Price：HKD1580/each

Ninja 500/SE(24-25)Gilles Tooling handshield brake side

Product Code：BHP2-02-BD

Description 簡介：Description The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HKD1270

Ninja 500/SE(24-25)Gilles Tooling handshield clutch side

Product Code：KHP2-02-BD

Description 簡介：Description The well-known and popular two-part structure of our lever protector has remained. In addition, the arm made of very resistant plastic-glass fiber mix, the clamping element for the steering tube and the black hard-anodized aluminum bracket have been fundamentally revised. The POM arm now appears in the new "Round Design" and impresses not only with its design but also with increased stability. Thanks to the new construction, the holder can now be adjusted or rotated, which ensure

Price：HKD1270

Ninja 500/SE(24-25)Gilles Tooling handlebar GP-LIGHT 2 410

Product Code：GPL2-410.b

Description 簡介：Description - diameter 41mm (1-39/64 inch) - black anodized - Extremely light handlebar (approx. 670 grams) - Engraved alignment mark on the fork - Minimization of damage through separate clamping on the steerer tube. - Steering tube quick change through external screw connection. - The total length of the steering tube is 255.5mm. - An optimal tilt angle of 6 degrees for an ideal sporty and comfortable sitting position. - Part certificate for TÜV registration included.

Price：HKD1980

Ninja500/SE(24-25)Gilles Tooling brake fluid container cover

Product Code：BRC-05.b

Description 簡介：Description This brake reservoir cover is made of CNC milled aluminum can be very easily and quick installed, the looking is much better than before. The special feature are the four colored inserts (gold, silver, blue and red ring) which can be installed to own preferences.

Price：HKD590

Ninja 500/SE(24-25)Gilles Tooling AXB chain adjuster

Product Code：AXB-NC51.b

Description 簡介：Description The AXB chain adjuster: high-precision chain adjustment, special bolt enables axle adjustment in both directions, precise positioning by graded-scale, by applying the scale you can compensate serial tolerances, stays in the swing arm while rear wheel installation, braces the axle against compressive- and tensile load, available in different precious hard anodized colors. Works also with the OEM axle nut.

Price：HKD1110

Ninja 500/SE(24-25)Gilles Tooling fuel cap

Product Code：FCAP-04-B

Description 簡介：Description The new GILLES fuel filler cap is an outstanding example of precise craftsmanship. The exact milling and the smooth surface leave no doubt about the quality of the component. Every detail has been treated with the utmost care to make the final product as perfect as possible.This tank cap shows the passion and commitment of every single GILLES employee. As a symbol of quality and excellence, the new "FCAP" reflects the standards of our company. Developed through experiences fro

Price：HKD1170

Ninja 500/SE(24-25)Gilles Tooling mirror cover

Product Code：MC-03-KIT-B

Description 簡介：Description mirror cover black All individual parts can be ordered for most of our products. Use the installation manual to identify the required parts and enter the item number directly into the search field.

Price：HKD420

ZX-10R(21-25)Gilles Tooling MOON barend-mirror round

Product Code：M04-01-BD

Description 簡介：Description KEY FACTS - SCOPE OF DELIVERY: 1 PIECE, MIRROR CAN BE USED LEFT AND RIGHT - ELEGANT BAR END MIRROR - UNIVERSAL CLAMPING - PLUG-AND-PLAY - STEPLESS DUAL ADJUSTMENT - MATERIAL = HIGH-STRENGTH ALUMINUM - WEIGHT = 190g - WIDTH = 6mm - OPTIONAL: 7 DIFFERENT COLORINGS AVAILABLE(SEE BELOW) - HOMOLOGATION = E-MARK - SPARE PARTS SUPPLY = WE OFFER SPARE PARTS SUPPLY FOR THIS PRODUCT BAR END MIRROR This variant allows for easy and space-saving installation directly at the ba

Price：HKD1580

Z650RS(21-25)Gilles Tooling MOON barend-mirror round

Product Code：M04-01-BD

Description 簡介：Description KEY FACTS - SCOPE OF DELIVERY: 1 PIECE, MIRROR CAN BE USED LEFT AND RIGHT - ELEGANT BAR END MIRROR - UNIVERSAL CLAMPING - PLUG-AND-PLAY - STEPLESS DUAL ADJUSTMENT - MATERIAL = HIGH-STRENGTH ALUMINUM - WEIGHT = 190g - WIDTH = 6mm - OPTIONAL: 7 DIFFERENT COLORINGS AVAILABLE(SEE BELOW) - HOMOLOGATION = E-MARK - SPARE PARTS SUPPLY = WE OFFER SPARE PARTS SUPPLY FOR THIS PRODUCT BAR END MIRROR This variant allows for easy and space-saving installation directly at the ba

Price：HKD1580/each

Ninja 500/SE(24-25)Gilles Tooling MOON barend-mirror round

Product Code：M04-02-BD

Description 簡介：Description KEY FACTS - SCOPE OF DELIVERY: 1 PIECE, MIRROR CAN BE USED LEFT AND RIGHT - ELEGANT BAR END MIRROR - UNIVERSAL CLAMPING - PLUG-AND-PLAY - STEPLESS DUAL ADJUSTMENT - MATERIAL = HIGH-STRENGTH ALUMINUM - WEIGHT = 190g - WIDTH = 6mm - OPTIONAL: 7 DIFFERENT COLORINGS AVAILABLE(SEE BELOW) - HOMOLOGATION = E-MARK - SPARE PARTS SUPPLY = WE OFFER SPARE PARTS SUPPLY FOR THIS PRODUCT BAR END MIRROR This variant allows for easy and space-saving installation directly at the bar

Price：HKD1580/each

ZX-4R(23-24)Gilles Tooling adjustable clutch lever type FXL

Product Code：FXCL-27.b

Description 簡介：Description Product details: optimal shape for all grip styles unique by proprietary GILLES design ideal lever length for perfect control phosphate precise bearing TÜV approved up to 35 times adjustable high accurate grip length adjusting comfortable adjusting by central hand wheel rated brake joint beyond two finger braking zone

Price：HKD1100