Safety_SW-Motech_改裝零件_翔利車行有限公司 | 電單車用品 | 電單車服裝 | 電單車零件

FZ-1(05-16)SW-Motech frame slider kit

Product Code：STP.06.590.10000/B

Description 簡介：SW-MOTECH Frame Slider Kit Maximum protection of important motorcycle parts Elegant slider pads are made with light-weight, CNC-milled PA6-MO which offers higher tensile strength and more impact and UV resistance than Delrin Slider kits are made of abrasion resistant plastic (Nylon) Easy and user-friendly installation Included: 2 frame sliders Mounting material Mounting instructions Optional accessories: Slider Pads - Article STP.00.590.10000/B The Frame Sliders are removable from

Price：HKD1250

FZ-1(05-16)SW-Motech KOBRA handguard 1 point mounting

Product Code：HPR.00.220.25100/B

Description 簡介：KOBRA Handguard-Kit Conspicuous design Made of impact-resistant moplen plastic in black Protects from stone-chipping and weather protection For handlebars with 6mm / 8mm thread bar end Included: 2 KOBRA Handguards Mounting material Mounting instructions Optional available: KOBRA Extension allows almost 50 % more protection Article HPR.00.220.30100/B KOBRA LED blinkers (1 watt, overall 32 LEDs) Article HPR.00.220.30000/B Resistor-Set for 1 watt LED indicator, for original indicators

Price：HKD1500

FZ-1(05-16)SW-Motech LED indicator set for KOBRA handguards

Product Code：HPR.00.220.30000/B

Description 簡介：KOBRA LED indicators LED indicators for application with KOBRA handguards The indicators are equipped with 16 LED´s per side and have an e-quality mark. Simple to mount in KOBRA handguards. ECE test mark: E8 50R-001279 Included: 2 LED indicators Mounting instructions Specifics: Operating current of the LED indicators is 12 volt, consumption 1 watt per side For the correct frequency of the indicators (according to the original indicators) there might be a resistor neccessary. To u

Price：HKD500

FZ-1(05-16) SW-Motech resistor set for LED indicators

Product Code：HPR.00.220.30700/B

Description 簡介：Resistor Set For converting original 10 and 20 W turn signals to LED turn signals for KOBRA hand guards with only 1 W. Also suitable for other LED turn signals with 1 W. Included: 2 resistors (15 Ohm/20 W) 4 crimp connectors

Price：HKD150

FZ-1(05-16)SW-Motech BBSTORM handguard 1 point mounting

Product Code：HPR.00.220.15100/B

Description 簡介：BBSTORM Handguard kit The large BBSTORM handguard shells made of impact-resistant plastic have been specially developed for all-weather use and offer the best protection against cold and wind. In the event of a fall, damaged shells can be easily replaced. The BBSTORM handguards can be screwed onto the aluminum handlebars in just a few easy steps. For 6 mm / 8 mm internal handlebar threads Single point installation Timeless design meets abrasion-resistant Moplen plastic in these handguard s

Price：HKD1500

X-ADV(16-20)RC95 SW-Motech TRAVELLER SMART cushion

Product Code：SIK.00.410.10200/B

Description 簡介：TRAVELLER SMART Cushion The comfortable shape of the TRAVELLER SMART is particularly suitable for choppers and cruisers. TRAVELLER cushions are available in three designs - there is something for almost all motorbikes and seat positions. Your driving pleasure will be enhanced - for many years - thanks to the high quality manufacturing from materials with the utmost durability. Enjoy long tours from start to finish: The TRAVELLER comfort cushion with an air cushion made of durable polyurethan

Price：HKD1200

X-ADV(16-20)RC95 SW-Motech TRAVELLER RIDER cushion

Product Code：SIK.00.410.10000/B

Description 簡介：TRAVELLER RIDER Cushion The dynamic form of the TRAVELLER RIDER is particularly suitable for sporty touring motorbikes. TRAVELLER cushions are available in three designs - there is something for almost all motorbikes and seat positions. Your driving pleasure will be enhanced - for many years - thanks to the high quality manufacturing from materials with the utmost durability. Enjoy long tours from start to finish: The TRAVELLER comfort cushion with an air cushion made of durable polyurethane

Price：HKD1000

KLR650(07-18) SW-Motech crash bar clamps for lights

Product Code：NSW.00.004.13000/B

Description 簡介：Crash bar clamps for lights Mountable on crashbar or other motorcycle parts with suitable diameter Made of fibre-reinforced Nylon Inclusive rubber insert adapters for diameter 22 mm, 25,4 mm, 26 mm, 27 mm and 28 mm Color: Black Included: 2 crash bar clamps for lights 4 rubber insert adapters Mounting material Mounting instructions

Price：HKD350

ZX-636(18-23) SW-Motech slider set for front axle

Product Code：STP.08.176.10301/B

Description 簡介：Slider sets for front axle The front axle crash pads made of abrasion-resistant plastic protect the drive shaft from damage in the event of a fall. The smooth surface also provides excellent sliding properties. The polished bull logo in red adds a visual highlight to your motorcycle. Protection for the fork Discreet slider pad made from abrasion-resistant polyamide Robust core made of fiberglass-reinforced plastic (PA6 GF30) High mechanical damping capacity due to TPE coating Good slidin

Price：HKD550

Tracer 9 GT(20-23) SW-Motech EVO fog light set Universal

Product Code：NSW.00.004.51000/B

Description 簡介：EVO Fog light kit Universal This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied

Price：HKD3600

MT-10(16-21) SW-Motech Lever guards with wind protection

Product Code：LVG.06.861.11000/B

Description 簡介：Lever guards with wind protection Together with the lever guards, the impact-resistant wind protectors from SW-MOTECH offer additional protection on the handlebars. The sporty look is perfect for Naked Bikes and Sports Tourers. The wind protectors are made of black plastic and offer additional protection in the case of falls and accidents. Mounting on the lever guards is easy using the two screws included in delivery. These beautiful lever guards made from black, anodized aluminum are an eye

Price：HKD1500

MT-10(16-21) SW-Motech lever guards

Product Code：LVG.06.861.10000/B

Description 簡介：Lever guards These beautiful lever guards made from black, anodized aluminum are an eye-catcher and protective product at the same time. Originally used in racing, they are a attractive addition for the style-conscious rider. They are mounted to the side of the handlebar, and the bike-specific screws are included in delivery. To be attached to the end of the handlebar High-quality forged parts with milled areas Protection for brake lever and clutch lever Additional protection against fall

Price：HKD1350

MT-10(16-21) SW-Motech KOBRA LED Indicator

Product Code：HPR.00.220.30000/B

Description 簡介：KOBRA LED indicators LED indicators for application with KOBRA handguards The indicators are equipped with 16 LED´s per side and have an e-quality mark. Simple to mount in KOBRA handguards. Included:•2 LED indicators •Mounting instructions Specifics:•Operating current of the LED indicators is 12 volt, consumption 1 watt per side •For the correct frequency of the indicators (according to the original indicators) there might be a resistor neccessary. •To use the

Price：HKD500

XSR900(22-23)SW-Motech EVO fog light set Universal

Product Code：NSW.00.004.51000/B

Description 簡介：EVO Fog light kit Universal This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied

Price：HKD3650

NC700X(12-13)SW-Motech centerstand

Product Code：HPS.01.137.10001/B

Description 簡介：Centerstand The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires. Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mou

Price：HKD2200

NC700X(12-13)SW-Motech EVO footrest kit

Product Code：FRS.01.112.10303

Description 簡介：EVO footrest kit for Honda NC, Crossrunner, Crosstourer and Suzuki SV650, DL650 The new EVO footrest enhances stability, comfort and traction under a variety of conditions. Pivotable, teethed elements offer 36 possible settings. Individual adjustment for height, position and angle guarantee best ergonomics possible. Easy installation to original mounting points 36 position settings (front, back, down, angle) Strong connection due to teethed and bolted elements Marks facilitate symmetric a

Price：HKD1450